How to Frame a Hatch Show Print

Any country music lover out there? Being a huge country music fan myself, I have collected a few Hatch Show Prints over the years (If you don’t know what that is, google it. They are a staple in country music history). Because they aren’t a standard photo or poster size, there are no frames that they fit in. I had looked into having one custom made, but it was expensive and didn’t really fit the vibe anyways.

After seeing some vintage school maps in an antique store, I got inspired to hang them myself, simply using some scrap 1X2’s and a staple gun. It was super easy, and would cute with any artwork. The best part is total cost for all of the supplies was less than 10 dollars. Here’s how I did it!-how to hang a hatch show print

Supplies: 1X2’s- I cut them long enough to have a 1/2 inch overhang on each side, Wood stain for if you want to stain them, string, staples, and a stapler gun.

First step: Cut your board to size. Like I said, I wanted mine to over hang about a half an inch on each side. If you don’t own a saw, Home Depot or Lowe’s will cut the boards for you while you’re there.

Second step: Stain them! I stained my “provincial” by MinWax. Painting would be pretty too!

hatch show print diy (5)
Step three: Take your print and decide where you’ll want it to hang on the boards. Measure that space and mark it three times across the back of the paper. Draw a straight line through them, and this is where the board will cover your paper on the front.hatch show print diy (6)

Step four: Line the edges of your board with the line you just drew, and staple in the middle. Staple once on each side. Repeat step three and four with the other board.
hatch show print diy (4)

Step six: Grab your string and cut it to you desired length.  I made mine about four inches shorter than my top board, knowing that the weight of the picture would pull it down to be visible. Staple it taut across your top board, as close to the top edge as you can. If you feel like the string is going to pull out of your staple, tie the loose end twice around the staple.

You’re done! Now you have a gorgeous and cute piece of art to hang anywhere in your house!
There are so many possibilities of what you could hang like this, from handkerchiefs, to canvases or pictures or big posters. You could even hang a quilt on the wall like this if you made sure to use enough staples, and maybe a 1X4 instead of 1X2. If you make one, tag me on instagram so I can see it! I love seeing what yall create and how you put your own ideas into things!
diy hanging art

Save

Leave a Reply

Your email address will not be published. Required fields are marked *